INKOMA SHG inokurumidza kusimudza screw jack inozivikanwa nekushanda kwayo nesimba uye kusimba, zvichiita kuti ive sarudzo yepamusoro kune vatengi vanoda kushanda kwepamusoro uye hupenyu hurefu hwebasa. Inowanikwa mumasaizi mana, inovhara kuremerwa kubva pa1.5 t kusvika 9 t uye yakanakira maapplication anoda yakakwira dhizaini kurodha uye akawedzera basa kutenderera.
Features:
- Kusimudza Masimba: 15 kN kusvika 90 kN
- Dhivha Yekumhanyisa: Inopinza inomhanyisa kusvika ku3000 rpm
- Screw Type: Kuzvivharira trapezoidal screw (inosarudzika bhora sikuruu iripo)
- Lubrication: Kuparadzanisa masekete ekuzora kuti uite zvirinani
- Machine screw ine girisi lubrication
- Bevel magiya ane mafuta-yekugeza lubrication
- Bevel Gear Ratios: Inowanikwa muzvikamu 2:1 uye 3:1
- Durability: Nyaya-yakaomeswa uye pasi bevel giya uye shafts
- Kunyatsoita: Helical spiral zino bevel magiya anopa kumhanya kwakanyanya kusimudza, kunyatsoshanda, uye hupenyu hurefu hwebasa.
INKOMA SHG yakatevedzana inopa musanganiswa wakakwana wekumhanya, kusimba, uye kushanda nesimba, zvichiita kuti ive yakakodzera maindasitiri uko kunonyanya kushanda uye kushandiswa nguva dzose kunodiwa.
| Saizi (SHG) | 15 | 25 | 50 | 90 | |
| Max. kusimudza simba dynamic/static | [kN] | 15 | 25 | 50 | 90 |
| Max. tensile load dynamic/static | [kN] | 15 | 25 | 50 | 90 |
| Screw Tr | 24×5 | 35×8 | 40 × 7 | 60 × 9 | |
| Chiyero N | 2:1 | ||||
| Lift per revolution yereshiyo N | [mm/per rev.] | 2.5 | 4 | 3.5 | 4.5 |
| Ratio L | 3:1 | ||||
| Lift per revolution yereshiyo L | [mm/per rev.] | 1.66 | 2.67 | 2.33 | 3 |
| Max. dhiraivha simba2) paT = 20 °C Duty cycle (ED) 20 %/h | [kW] | 1 | 1.5 | 2.4 | 8.9 |
| Max. dhiraivha simba2) paT = 20 °C Duty cycle (ED) 10 %/h | [kW] | 1.3 | 2.6 | 3.8 | 13 |
| Screw efciency rating | [%] | 41 | 43 | 37 | 33 |
| Screw torque pa max.kusimudza simba | [Nm] | 29.4 | 73.2 | 123.4 | 398.5 |
| Max. inobvumirwa drive-shaft torque | [Nm] | 50 | 125 | 175 | 1600 |
| Misa nguva ye inertia J Chiyero N mhando 1 | [kg cm2] | 1.058 | 6.63 | 22.44 | 181.28 |
| Misa nguva ye inertia J Chiyero N mhando 2 | [kg cm2] | 1.079 | 6.79 | 22.89 | 184.92 |
| Misa nguva ye inertia J Chiyero L mhando 1 | [kg cm2] | 0.677 | 3.6 | 7.248 | 123.79 |
| Misa nguva ye inertia J Chiyero L mhando 2 | [kg cm2] | 0.691 | 3.67 | 7.393 | 126.28 |
| Zvinhu zveimba | SH-GJL-250 | G-AlSi10Mg | SH-GJL-250 | ||
| Huremu pasina kureba sitiroko uye kudzivirira chubhu | [kg] | 9 | 13.5 | 23 | 85 |
| Screw uremu pa 100 mm sitiroko | [kg] | 0.8 | 0.59 | 1.5 | 2.5 |
| Huwandu hwemafuta mugiya rehonye | [kg] | 0.15 | 0.9 | 0.6 | 3.5 |
