Iyo INKOMA HSGK Yepamusoro Performance Screw Jacks akagadzirirwa zvinoda maapplication, achipa kusimba kwakasiyana uye kuita. Akashongedzerwa nemafuta ekuzora uye kutonhora zvimbi, aya jacks anovimbisa kushanda kwakakwana kunyangwe pasi pemamiriro akanyanya. Nekuvaka kwakasimba uye zvinhu zvakanyatsosarudzwa, zvinopa kushanda kwepamusoro uye hupenyu hurefu.
Zvinonyanya kukosha:
- Saizi: Inowanikwa mumhando kubva kuHSGK-3 kusvika kuHSGK-9
- Kutakura Capacity: Inotsigira zvese zvinomanikidza uye zvinorema mitoro inosvika 1000 kN
- Input Speed: Kusvika 3000 rpm
- Cooling Fins: Kuwedzeredzwa kwekupisa kwemamiriro ekunze
- Zvishandiso: Yepamusoro-mhando yegrey cast iron imba, yakanyatso gadziridzwa zviso zviso, mafuta akadzoreredzwa mwero chiratidzo, uye siruu yemhepo.
- Spindle Types: Inowanikwa ne trapezoidal kana ballscrew spindles
- Magiya: Worm vhiri rinotyairwa neakaomeswa uye pasi magiya ane optimized geometry
- Tsigiro: Tsono rollers inotsigira radial mitoro pane spindle yekuwedzera hupenyu uye kuita
- Design Options:
- Inotenderera vhezheni (R): Inopa mutsara kusimudza kuburikidza nekutenderera kutenderera, ine spindle axially yakagadziriswa.
- Dudziro yeshanduro (S): Iyo spindle inofamba zvine mutsindo kusimudza mutoro, ine muganhu wekufamba uye kudzivirira kutenderera kunowanikwa mumashanduro akaita seSA.
Features:
- Yakakura yakawanda yezvishandiso zviripo pakugadzirisa
- Input inomhanyisa kusvika 3000 r/min uye yakakwira-kutakura mitoro
- Yakagadzirirwa zvese zviri zviviri zvinomanikidza uye zvinorema mitoro
Pamibvunzo chaiyo, magadzirirwo echivanhu, kana zvimwe zvinodiwa (semuenzaniso, mavhezheni asingaite ngura kana dzimba dzakagadziridzwa), kubvunzana nechikwata cheINKOMA kunokurudzirwa kuti igadzirise sisitimu zvinoenderana nezvaunoda.
| Saizi (HSGK) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
| Max. kusimudza simba dynamic/static | [kN] | 25 | 50 | 100 | 200 | 350 | pakukumbira | 1000 |
| Max. tensile load dynamic/static | [kN] | 25 | 50 | 100 | 178 | 350 | 1000 | |
| Screw Tr | 40×8 | 50 × 9 | 60 × 12 | 70 × 12 | 100 × 16 | 160 × 20 | ||
| Chiyero N | 6:1 | 7:1 | 8:1 | 8:1 | 10 2/3:1 | 13 1/3:1 | ||
| Lift per revolution yereshiyo N | [mm/per rev.] | 1.33 | 1.28 | 1.5 | 1.5 | 1.5 | 1.5 | |
| Ratio L | 24:1 | 28:1 | 32:1 | 32:1 | 32:1 | 40:1 | ||
| Lift per revolution yereshiyo L | [mm/per rev.] | 0.33 | 0.32 | 0.375 | 0.375 | 0.5 | 0.5 | |
| Max. dhiraivha simba2) paT = 20 °C Duty cycle (ED) 20 %/h | [kW] | 1.5 | 2.3 | 3.6 | 4.8 | 7.7 | 17.9 | |
| Max. dhiraivha simba2) paT = 20 °C Duty cycle (ED) 10 %/h | [kW] | 2.6 | 4 | 6.3 | 8.4 | 13.5 | 31 | |
| Screw efciency rating | [%] | 40 | 36.5 | 39.5 | 35.5 | 34 | 28.5 | |
| Screw torque pa max.kusimudza simba | [Nm] | 80 | 190 | 478 | 1060 | 2600 | pakukumbira | 11115 |
| Max. inobvumirwa drive-shaft torque | [Nm] | 48,7 | 168 | 398 | 705 | 975 | 4260 | |
| Misa nguva ye inertia J Chiyero N mhando 1 | [kg cm2] | 1.247 | 3.1 | 11.97 | 30.11 | 60.76 | - | |
| Misa nguva ye inertia J Chiyero N mhando 2 | [kg cm2] | 1.364 | 3.378 | 13.05 | 32.21 | 65.76 | - | |
| Misa nguva ye inertia J Chiyero L mhando 1 | [kg cm2] | 0.638 | 1.804 | 8.13 | 20.91 | 44.88 | - | |
| Misa nguva ye inertia J Chiyero L mhando 2 | [kg cm2] | 0.645 | 1.822 | 8.2 | 21.04 | 45.43 | - | |
| Zvinhu zveimba | EN-GJS-500-7(GGG50) | |||||||
| Huremu pasina kureba sitiroko uye kudzivirira chubhu | [kg] | 13 | 25 | 47 | 74 | 145 | pakukumbira | 870 |
| Screw uremu pa 100 mm sitiroko | [kg] | 0.82 | 1.3 | 1.79 | 2.52 | 5.2 | 13.82 | |
| Huwandu hwemafuta mugiya rehonye | [kg] | 0.4 | 0.9 | 1.5 | 2.1 | 5 | 15.5 | |
